Workout of the Week 12/14: Alpha Deltoid

Pre-note:

      Let’s be honest, shoulders make or break a great pair of arms. They make you appear wider, adding to that aesthetic look every lifter desires. Some believe that they do not need to be directly hit, since they are a secondary mover in almost every upper body compound movement. Because of that very reason, I believe the complete opposite. A system is only as strong as it’s weakest point, don’t let your shoulders be that point. Give them an isolation workout, and hit them from every angle. Grow your pumpkins; be proud of your pumpkins.

WARM-UP

Cardiovascular machine- 5min-10min

Thera-band /resistance rotator cuff warm-up- 2 sets of 30 reps, each direction. The resistance tug should be very moderate and controlled. DO NOT skip this warm-up, trust me, you want to keep these healthy. (figure I-1)

I-1
I-1

 

 

Light warm-up sets- 2-3 sets of 10-15 reps with very moderate weight. This will familiarize the movement, and bring blood to the shoulders.

WORKING SETS

Standing 1 arm dumbbell shoulder press: 4×10; 120seconds rest.

Set-up: You will only need one dumbbell. Be sure to pick one that is lighter than you would for a traditional seated DB military press. You will also need to find a non-movable piece of equipment to grab for stability.

Execution: Feet should be just wider than shoulder width, with knees slightly bent, and core contracted for a rigid torso. Hoist the dumbbell to shoulder height with the help of your other arm. Once in position, grab for support with the non-working arm. While keeping shoulders level, press the dumbbell until just before lockout. The dissent should be very controlled and stopped as your elbow drops just below your shoulder.

Tips: Body weight should be centered, with no visible lean in any direction. Technique is very crucial for this lift. I would not recommend throwing up big numbers until proper form is second nature.

Front raise/lateral raise hybrid: 3×10; Superset lift 1- no rest.

Set-up: Grab 2 dumbbells. Preferable the weight you would use for a DB front raise.

Execution: While keeping elbows fairly bent, raise your arms in the 1791_21791_4direction between a front raise and a lateral raise. If someone were to take a picture of you during the peak of the movement, your arms would resemble a person riding a motorcycle with big  handle bars. Exhale as you raise, and inhale as you drop.

Tips: Try your best to keep your shoulders depressed (avoid shrugging). Also, slightly loose form is suggested, but don’t get sloppy and excessively swing.

Plate or resistance band partial raise: 3×15- Super set lift 2; 120s rest.

Set-up: Grab barbell plates, or a resistance band that you could not perform a complete lateral raise with. Plates held in front of body. Resistance band should be stepped on and feet width adjusted to desired tension.

Execution: While keeping shoulders neutral (not allowing shrugging) and elbows locked, perform a lateral raise that ends just before halfway of

PicMonkey Collage
DB partial raise

normal ROM. The weight should be controlled at all times; this may require high mental intensity.

Tips: I love this exercise for my lateral shoulders. The overload of weight is perfect for recruiting the deeper muscle fibers that a normal lateral raise may not activate. While movement should be small, it should at least bring the weight 6 or so inches from starting position

Over prone lateral raise: 3×15; 60s rest

Set-up: Grab 2 dumbbells, moderate weight. Slightly lighter than you would for a normal lateral raise.

Execution: Everything should resemble a lateral raise, EXCEPT elbows should be rotated out. This should allow you to slightly see your pinkies. Lift the weight so that the contraction is focused onto your posterior shoulder. Elbows SLIGHTLY bent. Do not shrug shoulders! Exhale on raise, and inhale on dissent.

Tips: As mentioned above, DO NOT SHRUG, that is crucial. Shrugging will deter the work away from your posterior delts where it is desired, and redirect it to your traps where it is unwanted. This lift is the perfect way to slightly target your posterior shoulders so that you may keep them in your “push day”.

4 direction burn-out: 2×28 reps; 30s rest.

Set-up: Grab a very light set of dumbbells. Think about it, you’re going to perform 28 reps..

Execution: Below is the sequence.

  1. Bent over reverse fly: 7 reps

    burnout.jpg
    Burnout sequence
  2. Lateral raise: 7 reps
  3. Front raise: 7 reps
  4. overhead press: 7 reps

Tips: Perform all reps slower than usual. Chase the burn, chase the pump. Completely fatigue your shoulders. Keep form F-L-A-W-L-E-S-S.

 

 

This concludes the shoulder workout

Great to pair with:

An entire push day (chest, shoulders, triceps), or biceps. You may also pair individually with any of the push muscle groups. I would not advise doing them the day before chest.

STRETCH

Do 2-3 reps of each stretch for 10-20 seconds. Focus on breathing to allow a deeper stretch range of motion.

Click any to enlarge

PRAY

God gave you another day, and another healthy workout.

Kyle Blair

Email: kblair_fitness@aol.com

For coaching click below.

http://www.kblairfitness.com/online-fitness-plans.html

For more workouts click below.

http://www.kblairfitness.com/training.html

Workout Of The Week November 15th: Biceps For Dayzz

WARM UP

 

Picture on cover: Doug Miller IFPA pro.

Cardiovascular machine- 5min

 

Thera-band /resistance band curls- 2 sets of 30 reps. This will help initiate the vasodilation in the area; always have been a strong believer in the relationship of “the pump” and growth in the biceps specifically.

Resistance band curl
Resistance band curl

Light warm up sets- Before starting your working sets, make sure to do 2-3  very light sets to familiarize the movement and bring blood to the muscle.

WORKING SETS

Standing Hammer Curls: 3×8- 60s rest

SET-UP: You will need 2 dumbbells. Grip them so that the thumb side of your hand is close to the to the top portion of the dumbbell.

EXECUTION: Curl the dumbbell until the angle of your elbow is 90 degrees or slightly less. Then lower the

Hammer Curl
           Hammer Curl

dumbbell until almost locked out. Do not completely lock out, because this will remove the tension from the bicep. You may perform this lift with both arms simultaneously or alternating (I prefer the latter).

TIPS: These first three working sets are where you absolutely lift your hardest; the muscle is fresh, and strength is at its greatest. I will be the first to suggest swinging excessively is unneeded, but slight momentum can help you move more weight, thus volume.

Standing Cross-Body Hammer Curls: 2×10- 60s rest

SET-UP: Same as above.

EXECUTION: Repeat the previous exercise, but across the body. The motion continues until the dumbbell is just in front of the opposite pectoral muscle. Then in a controlled fashion, lower the arm to starting position. You may have to lean forward slightly, to make room for the dumbbells. Alternate between right and left.

Cross-body hammer
Cross-body hammer

TIPS: This exercise works more efficiently if you check your ego and focus on every rep being of quality.  I also like to keep my thumbs unwrapped occasionally, I feel it directs more work to the upper arm. You may experiment-

with a slight peak twist as well (trust me, do it).

Incline Bench Dumbbell Curl: 3×12- Superset with next exercise. no rest

SET-UP: You will need an adjustable bench and dumbbells. Adjust the seat one click steeper than a normal incline press. Hang arms straight down as if the shoulders were function-less, and shoulder blades tight to the pad.

incline bench curl
incline bench curl

EXECUTION: Begin by curling the dumbbell until the bend is 3/4th the way up. The eccentric motion controlled down until just before lockout. The shoulders shouldn’t move, only the forearm.

TIPS: I usually feel a stretch in my shoulder when my arm is in correct position. If you find it hard to keep your arm from swinging forward when curling, it’s probably too heavy.

Low Pulley Spider Curls: 3×12- 120s rest

            low pulley spider curls

SET-UP: Use the cable attachment you would for a back row, but instead attach a straight curl bar piece. Hips at 90 deg. Knees should be slightly bent, back is flat, chest is up, and arms extended forward- rib cage height. You will hardly need any weight, so start with 15-20lbs initially.

EXECUTION: While keeping upper arm in same position, curl until you your hands are just in front of your face. Eccentric should be slow and stopped just before full extension.

TIPS: This is a technique and squeeze lift. I find pausing with a squeeze for 2 seconds at peak contraction really amplifies the intensity.If you find yourself swinging your elbows during reps, lower the weight; its too heavy.

Double Cable Curl Burnout Out: 3×30; 90s rest

SET-UP: You will need two cable attachments, so prepare to be “that guy/girl” lol. Adjust attachments until just above head level

EXECUTION: The lift has 3 parts.

Part 1- Curl until hand is an inch or so away from your ear, and return until just before lockout- 10 reps

double cable curl

Part 2- Do tiny curl like motions from 70 to 110 degrees. Focus on quick, solid contractions- 10 reps

Part 3- Hold an isometric (non-moving) contraction at peak position. -10s hold

TIP: Keep Elbows straight out from side. A common mistake is allowing the elbows to move inward, avoid this! This is a burnout, so use moderate weight. Try having someone push out against your arms during the 10 second isometric hold, really heats things up. Chase the burn!

This concludes biceps. Great to pair with a back or triceps.

STRETCH

Do 2-3 reps of each stretch for 10-20 seconds. Focus on breathing to allow a deeper stretch range of motion.

bicep stretch

CLICK PICS TO ENLARGE

PRAY

God gave you another day, and another healthy workout.

Kyle Blair

Email: kblair_fitness@aol.com

For coaching click below.

http://www.kblairfitness.com/online-fitness-plans.html